| |
| » Superior Built-up Sections |
- Minimum thickness of 4 mm for webs, 5 mm for flange width up to 150 mm, to ensure a better quality product
|
| |
| » End Wall Framing |
- Usage of hot rolled mill sections and built-up sections in end wall bearing frames
- Superior and more rigid than the traditional cold formed “C” section end wall frames
|
| |
| » Pre-galvanized Secondary Members |
- Usage of only pre-galvanized steel coils to roll form secondary members (Z&C sections)
- Pre-galvanized purlins will remain rust free, and do not require any painting
|
| |
| » Wide Bay Purlins |
- Wide bay purlins spanning up to 12 M for better shop floor layout and less foundation costs
|
| |
| » Roofing System |
| |
| Generally, 50% of the complaints in a steel building are about the roofing components and water infiltration problems |
- Double-Lok® Standing Seam Panel System - a well-proven solution for a metal roof. This time-tested world class standing seam technology was developed by MBCI, a division of NCI Group Inc., USA.
- With Billions of square meters of sheets already installed worldwide, this system has a track record of being the most reliable leak proof roofing system
- With its assured weather tightness advantages, this system is the best choice of a roofing system in India
- Double-Lok® standing seam system with a mobile site roll former facilitates single roll formed sheet from ridge to eave with no end laps in between
|
| |
| » Superior Cladding Fasteners |
- Usage of self-drilling screws conforming to AS 3566-2002, Class – 3
- Premium high-corrosion resistant screws along with their bonded EPDM seals form the best fastener system
|
| |
| » Bead Mastic for Roof sheeting side and end laps |
- Usage of bead mastic in all roof panel side and end laps
- Bead mastic, when installed properly, provides the best guarantee against roof leaks
- Not all PEB manufacturers in this region use this technique
|
| |
| » Roll-formed Downspouts |
- Usage of roll-formed downspouts with longitudinal full length corrugations, which are very aesthetic
- These downspouts can be supplied in one piece for any length up to 12M, which reduces number of field joints
- The normal press-broken downspouts are dull looking and spoils the appearance
|
| |
| » Valley Gutters |
- Supply of valley gutters of 1.5mm thick in maximum possible lengths up to 6M, so as to reduce number of joints
- They are painted with one coat of epoxy primer to the exposed face of the valley gutter providing years of corrosion free surface
- Designed to avoid the leakages
|
| |
