pebs pennar
A Pennar Group Company
  To know more about our products and services please get in touch with us today. Our contact details are given below for your convenience.

» Fascia
PEBS Pennar offers two types of Fascias
  • Parapet / Flush
  • Cantilevered with three sheeting options - straight, bottom curved and top & bottom curved
» Roof Monitor
PEBS Pennar’s standard roof monitor has a throat width of 1.5 M and a height of 1.0 M, made from hot rolled sections. Panels for roof monitor will be the same as supplied for main building unless otherwise specified. We can also supply roof monitor of varied sizes as per client’s requirements.  
» Mezzanine Floor
PEBS Pennar’s standard mezzanine floor consists of joists, beams, intermediate columns and galvanized profiled decking sheets. Decking sheets are profiled from pre-galvanized coils. For larger column free spaces, we also offer composite design with shear connectors.
» Roof Extensions
PEBS Pennar’s standard roof extensions are 1.5 M wide, which are achieved by extending the end bay purlins beyond the end wall steel line. We can also provide Soffit panels, if required by the client.
» Canopies
PEBS Pennar’s standard canopies are 1.5 M wide and can be provided at eave or any height below the eave. If required, Soffit panels can also be provided. Rafters for canopies are made from hot rolled or built-up I sections.
» Crane Systems
PEBS Pennar designs buildings to support various crane systems, such as EOT, Monorail, Under Hung, Jib etc. Overhead cranes of upto 25MT are generally supported with brackets. For capacities more than 25 MT, a stepped column/independent support system is provided.

For PEBS Pennar to provide the best and the most economical solution, the following crane data need to be assessed:
  • Location of crane with travel length
  • Centre to centre distance of crane rails
  • Crane Hook height
  • Wheel loads
  • Vertical and horizontal clearances
  • Wheel base and bumper distances
  • Type of crane operations
  • No of cranes operating in a single bay
In case of the above data not furnished by the client, standard Electromech Crane Data is used upon client’s approval.
» Interior Partitions and Roof Platforms
Interior partitions are non-load bearing walls meant to serve as dividers within a building. Partitions are constructed from 200 deep built-up columns and flush girts and can be located in either transverse or longitudinal directions. These may be sheeted on either side or on one side with normal wall cladding profiles.
Corporate Office
Pennar Engineered Building Systems Ltd.
9th Floor (West Wing)
DHFLVC Silicon Towers
Hyderabad - 500 084
Telangana, India
T: +91 40 4021 0525/26
F: +91 40 40186992
Post Your Resumes
Terms of service | Privacy guidelines | Site Map | Disclaimer | Contact us | Help
Copyright © 2016 Pennar Industries Limited